PROBLEM SOLVER – BLISTERING
Blistering is paint bubbles resulting from localized loss of adhesion and lifting of the paint film from the underlying surface.
POSSIBLE CAUSES:
- Painting a warm surface in direct sunlight.
- Application of oil-based or alkyd paint over a damp or wet surface.
- Moisture escaping through the exterior walls (less likely with latex paint than with oil-based or alkyd paint).
- Exposure of latex paint film to dew, high humidity or rain shortly after paint has dried, especially if there was inadequate surface preparation.
SOLUTION:
- If blisters go down to the substrate: try to remove the source of moisture. Repair loose caulking; consider installing vents or exhaust fans. Remove blisters (see Below).
- If blisters do not go all the way down to the substrate: remove them by scraping, then sanding, prime bare wood and repaint with a quality latex exterior paint.
![blistering paint](https://www.roddapaint.com/wp-content/uploads/2021/10/how-to-problem-solver-int.jpg)