Corroseal Cleaner

Corroseal^® Cleaner safely cleans Metal, Concrete, Plastic, and Most Painted Surfaces.

Corroseal Cleaner is a water-based product that penetrates and lifts out grease, oil, ink, coffee, blood, and other durable stains from most washable surfaces. It is recommended for prepping the rusted metal surfaces prior to the application of the Corroseal Rust Converter Primer.

Corroseal Cleaner is a water-based (non-solvent), non-corrosive, and non-flammable Cleaner & Degreaser that easily loosens oils, grease, and other solids from full suspension and removal, from a variety of surfaces.

Corroseal Cleaner has a mild pH and is suitable for use on most water-safe surfaces. It can be diluted for all cleaning tasks.

Instructions:

Metal Cleaning – To remove dirt, grease and other contaminates from metal, dilute 16 oz. of this product per gallon of cold tap water. Apply with a sprayer or brush onto the surface. Allow to penetrate 5-10 minutes. Agitate with a stiff bristle brush. Rinse the surface clean.

Concrete and Brick – To remove oil and grease, dilute 16 oz. of this product per gallon of cold tap water. Allow it to penetrate for 10 minutes. Agitate with a stiff brush. Rinse the surface clean.

Filter Cleaning – Remove the filter from the unit. Dilute 16 oz. of this product per gallon of top water. Spray on the filter. Allow it to remain for 10 minutes. Rinse clean.

Floor and General Cleaning – Dilute 2 oz., per gallon of cold tap water. Mop or wipe on the surface with the usual cleaning method.

Pressure Sprayer – Dilute at 8-12 oz. per gallon of cold tap water, depending on soil content and use. Spray on. Let it soak on heavily soiled areas. Rinse clean.